| Closed-end zipper | From the top end of the slider to the tip of the bottom stop (A) | From the top stop to the to the tip of notches of the cut end (B)
|
From the bottom stop to the tip of notches of the cut end (C) |
| Zipper with double sliders (arranged in head to head relation) | From the tip of one bottom stop to the tip of the other bottom stop (A) | From the upper bottom stop to the tip of notches of the cut end (B)
|
From the tip of the bottom stop to the tip of notches of the cut end (C) |
| Zipper with double sliders (arranged in bottom-to- bottom relation) | From the top end of one slider to the top end of the other slider (A) | From
the top stop to the tip of notches of the cut end (B)
|
Same as the top tape extention end portion (C) |
| Open-end zipper | From the top end of the slider to the tip of the box (A) | From the top stop to the cut end
(B)
|
|
| Two way separator | From the top end of the slider to the bottom end of the supplementary tape (A) | From the top stop to the cut end
(B)
|
|
| Top open zipper | From the top stop to the tip of the box (A) | From
the top stop to the cut end (B)
|
|
| Reversible slider | Rather than from the top end, measurement should be made from the shoulder inlet portion of the slider (A) | From the top stop to the cut end
(B)
|
|
| When the top stop does not enter the slider | Measurement should be made from the top stop (A) | From the top stop to the tip of notches of
the cut end (B)
|
